MDBT50Q-CX-40

Nordic nRF52840 Dongle (Type C USB Connector)

* Nordic nRF52840 SoC Solution Dongle
* A recommended 3rd-party module by Nordic Semiconductor.
* BT5.4 & BT5.2 & BT5.1 & BT5 Bluetooth Specification Certified.
* Type C USB
* Supports Open Bootloader
* Supports BT5 Long Range Feature
* Deployed Raytac MDBT50Q-P1M Module
* Certifications: FCC, IC, CE, UKCA, Telec (MIC), KC, SRRC, NCC, RCM, WPC
* 32-bit ARM® Cortex™ M4F CPU
* 1MB Flash Memory / 256kB RAM
* RoHS & Reach Compliant.
* Dimension：26.2 x 15.1 x 6.8 mm (excluding Type C USB Connector)
* Highly flexible multiprotocol SoC ideally suited for Bluetooth® Low Energy, ANT+, Zigbee, Thread (802.15.4) ultra low-power wireless applications.
BUY FROM
PRODUCT INFO
SPECIFICATION
DOCUMENT
Raytac nRF52840 Dongle deployed MDBT50Q-P1M module which is the most convenient tool to easy the implement fo Bluetooth 5 application.

Raytac provide a full range of modules based on nRF52840, spectrum covers MDBT50Q-1M, MDBT50Q-P1M and MDBT50Q-U1M series with Chip Antenna, PCB Antenna and u.FL connector for External Antenna option for selection. 

Highlight of nRF52840 Solution
* Supporting BT5 Long Range Feature
* Built in USB interface

MDBT50Q-U1M deployed u.FL connector for External Antenna and offers a super long range connectivity ability
MDBT50Q-1M deployed Chip Antenna and offers a excellent connectivity ability.
MDBT50Q-P1M deployed PCB Antenna and offers a good connectivity ability.

MDBT50Q-DB demo board is designed for quick testing and debugging without building your own board. The board is only available with MDBT50Q-1M (Chip Antenna) module. 

20230705 RAYTAC-組合1

 
Raytac’s MDBT50Q-CX-40 is a BT5.4 qualifed module designed based on Nordic nRF52840 SoC solution, which incorporates: GPIO, PWM and USB interfaces for connecting peripherals and sensors.

Bluetooth Qualified Specification: BT5.4 / BT5.3 / BT5.2 / BT5.1 / BT5
Regional Regulation Pre-Certified: FCC/IC/CE/Telec/KC/SRRC/NCC/WPC/RCM/UKCA
 
Quick Specifications
  • Bluetooth 5, IEEE 802.15.4, 2.4 GHz transceiver
    • -95dBm sensitivity in 1Mbps Bluetooth low energy (BLE) mode
    • -103dBm sensitivity in 125Kbps BLE mode (long range)
    • +8 dBm TX power (down to -20 dBm in 4 dB steps)
    • On-air compatible with nRF52, nRF51, nRF24L and nRF24AP Series 
    • Programmable output power from +8dBm to -20dB
    • RSSI (1dB resolution)
    • Supported data rates:
          • Bluetooth 5: 2Mbps, 1 Mbps, 500 kbps, 125 kbps
          • IEEE 802.15.4-2006: 250 kbps
          • Proprietary 2.4 GHz: 2 Mbps, 1 Mbps
  • ARM® Cortex™-M4F 32-bit processor with FPU, 64 MHZ
  • Memory: 1MB flash / 256KB RAM
  • HW accelerated security
    • ARM TrustZone Cryptocell 310 security subsystem
    • 128 bit AEC / ECB / CCM / AAR co-processor (on-the-fly packet encryption)
  • Interfaces on device
    • USB 2.0 full speed (12Mbps) controller
    • Programmable Peripheral interconnect (PPI)
    • 1 x Switch and max. 2 x LED
    • EasyDMA automated data transfer between memory and peripherals
  • 4 x 4 channel pulse width modulator (PWM) units with EasyDMA
  • 3 x 24-bit real-time counters (RTC)
  • Flexible power management
    • On-chip DC/DC and LDO regulators with automated low current modes
    • Automated peripheral power management
    • Fast wake-up using 64MHz internal oscillator
    • 0.4uA at 3V in System OFF mode, no RAM retention
    • 1.5uA at 3V in System ON mode, no RAM retention, are on RTC
  • Nordic SoftDevice ready and with support for concurrent multi-protocol
回上頁